Can I connect sections of Stage Zero track?

It is 'possible' but it will take some effort, engineering and patience.  Because the aluminum extrusion cooling process does not a guarantee a perfect match end to end and due to the effort required to get proper alignment we don't officially support connecting Stage Zero track, but many users have carefully mated sections of track and had success. Here's an example video where Joe Capra explains how he mated his rail together: . Recently 8020 is providing ready made connector plates via ebay that have all the hardware required to connect the 1030 rail end to end.  If you want to get the best performance out of connecting Stage Zero rail together remember:

-File down the sharp edges where the sliders make contact

-Be patient, take your time adjusting and aligning the rail 

-Make sure your joining hardware is secure

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk